Product Specs
Transmission Specifications
- Overall Gear Ration
- 7/21
Standard Equipment
-
- Cat Engines For Optimized Power Train
-
- C9 ACERT, C11 ACERT, C13 ACERT, C15 ACERT, C18 ACERT (A and B ratings)
-
- Transmission Rotation
-
- Input rotation — counterclockwiseOutput rotation — counterclockwise(as viewed from rear)
-
- Torque Converter
-
- Lock-up clutch, torque converter drive in all gears integral to transmission
- Stall torque ratio
-
- Clutches
-
- Clutches — electro-hydraulic fully modulated, oil cooled, multidisc
- Clutch modulation control — Cat Electronic Clutch Pressure Control (ECPC)
-
- Installation Connections
-
- 2 oil cooler lines
- 1 electrical connector
-
- Oil System
-
- Cat Transmission/Drive Train Oil-4 (TDTO) sump oil temperatures
- Maximum converter outlet oil temperature — 250°F (121°C)
- Hydraulic fill capacity — 6.5 gal (25 L) subject to cooler size, lines, and installation — initial fill may be greater
- Direct mount filter
-
- Mountings
-
- Input (flywheel) — SAE #1 dry flywheel housing
- Side supports — two SAE #2 pads
- Output — 1710 yoke, 1810 yoke, 1810 companion flange, ISO 8667-T180 flange
-
- Power Take-off Drives
-
- Location
- 8 bolt mounting type
- Rated torque
- Rotation: same as engine
- Ratio, 1:1
Attachments
-
- Oil System
-
- Remote mount oil filter
-
- Mountings
-
- Remote mount ECU
- Remote mount filter option
-
- Integral Power Take-off
-
- Location: 1 o'clock and 11 o'clock as viewed from rear
- Mounting type
- Rated torque
- Rotation: same as engine
- Ratio - 1.09:1
-
- Rear Power Take-off
-
- Location: 5 o'clock as viewed from rear
- Mounting type: 8 bolt
- Rated torque: 1000 lb-ft (1360 Nm)
- Rotation: Opposite of engine
- Ratio - 1.25:1