Exterior View
Product Specs
Engine Specifications
- Maximum Rating
- 600 BHP
- Emissions
- NSPS 2010
- Displacement
- 1648 in³
- Minimum Rating
- 600 BHP
- Compression Ratio
- 8.3:1
- Aspiration
- Turbocharged-Aftercooled
- Rotation from Flywheel End
- Counterclockwise
- Flywheel and Flywheel Housing
- SAE No. 14 or 18, Flywheel Housing SAE No. 0
- Flywheel Teeth
- 136
- Weight - Dry
- 6250 lb
- Oil Change Interval
- 750 hours
- Ignition, Protection
- Electronic ADEM A4
- Air/Fuel Ratio Control
- Electronic ADEM A4
- Stroke
- 6 in
- Bore
- 5.4 in
Capacity for Liquids
- Cooling System
- 20 gal (US)
- Lube Oil System - Refill
- 45 gal (US)
Standard Equipment
-
- Air Inlet System
-
- Air cleaner — single element with service indicator
- Optional air inlet adapter and rain cap — recommended for weather protection
-
- Control System
-
- ADEM A4
- Class 1, Division 2, Group C&D and Zone 2
-
- Cooling System
-
- Jacket water thermostats and housing — full open temperature 98°C (208°F)
- Jacket water pump — gear driven, centrifugal, non-self-priming
- Aftercooler water pump — gear driven, centrifugal, non-self-priming
- Aftercooler core — for treated water and sea air atmosphere
-
- Exhaust System
-
- Exhaust manifolds — watercooled
- Exhaust elbow — dry 203 mm (8 in)
- Three-way catalyst — 1.0 g NOx and 0.5 g NOx NTE options
-
- Flywheels & Flywheel Housings
-
- Flywheel, SAE No. 14 or 18
- Flywheel housing, SAE No. 0
- SAE standard rotation
-
- Fuel System
-
- Air/fuel ratio control
- Gas pressure regulator
- Natural gas carburetor
-
- Lube System
-
- Crankcase breather — top mounted
- Oil cooler
- Oil filter — RH
- Oil filler in valve cover, dipstick — RH
-
- Mounting System
-
- Engine mounting rails — 254 mm (10 in) industrialtype, entire length
-
- Protection System
-
- ADEM A4 protection
- The following include alarm and shutdown:
- The following is display only
-
- General
-
- Paint, Caterpillar yellow
- Crankshaft vibration damper and drive pulleys
- Lifting eyes
- Cylinder block inspection covers
Attachments
-
- Charging Alternator
-
- 24V, 35A CSA alternator
-
- Exhaust System
-
- Exhaust flex fitting
- Exhaust elbow
- Exhaust flange — ANSI
-
- Instrumentation
-
- Operator interface panel
- Operator interface panel enclosure
- 15', 20', 50' interconnect harness
-
- Starting System
-
- Air pressure regulator
- Air start silencer
- Vane starter
- Electric starter
- Turbine starter
-
- Fuel System
-
- Fuel filter
-
- Air Inlet System
-
- Precleaner
- Rain cap