Exterior View
Product Specs
Generator Set Specifications
- Maximum Rating
- 110 kVA
- Minimum Rating
- 50 kVA
- Emissions/Fuel Strategy
- EU Stage II & R96/EUIIIa
- Voltage
- 110 to 480 Volts
- Frequency
- 50 Hz
- Speed
- 1500 rpm
- Duty Cycle
- Standby, Prime
Engine Specifications
- Engine Model
- Cat® C4.4
- Bore
- 4.1 in
- Stroke
- 5 in
- Displacement
- 268.5 in³
- Compression Ratio
- 16.2:1, 17.25:1, 18.2:1 or 18.3:1
- Aspiration
- Turbocharged
- Fuel System
- Direct Injection or Common Rail
- Governor Type
- Mechanical
Generator Set Dimensions
- Length - Maximum
- 75.8 in
- Width - Maximum
- 44.1 in
- Height - Maximum
- 53.6 in
Standard Equipment
-
- Air Inlet System
-
- Air cleaner; light duty with disposable element
-
- Cooling System
-
- Coolant drain line with valve
- Caterpillar extended life coolant
- Radiator and cooling fan with guards
- Fan drive, battery charging alternator drive
-
- Exhaust System
-
- Stub pipe, gaskets, raincap and SAE exhaust flange for customer use - shipped loose
-
- Fuel System
-
- Standard open set fuel tank/base supplied base, formed steel with single wall integral 8-hour fuel tank
-
- Control Panel
-
- GCCP 1.3
-
- Generators And Attachments
-
- Voltage regulator (single phase sensing)
- Tower panel, IP22, bottom cable entry
- IP23 Protection
- Circuit breaker, IEC, 3 pole, mounted in tower panel
- 12 Leads
- Segregated low voltage (AC/DC) wiring panel
-
- Governing System
-
- Mechanical and electrical governing system - model dependent
-
- Mounting System
-
- Captive linear vibration isolators between base and engine-generator
- Includes lifting provision and drag points
- Termination points for coolant and lube oil drain lines
-
- Starting/charging System
-
- Batteries
- 24V battery with rack and cables
-
- General
-
- Engine and alternator pre-paint, Caterpillar yellow
-
- Lube System
-
- Oil drain line with valve
- Lubricating oil
Attachments
-
- Alternator System
-
- 3 phase sensing
- Anti-condensation heater
- R Frame auxilliary winding
- LC Frame alternator
- Quadrature droop kit
- Permanent magnet excitation (PMG)
- LC Frame alternator with coastal insulation protection
-
- Circuit Breakers
-
- Circuit breaker upgrades - 4 Pole circuit reaker to 250A, 400A and 630A
-
- Cooling System
-
- Coolant heater
- Low coolant temperature alarm
- Low coolant level shutdown
-
- Control Panels
-
- GCCP 1.3
-
- Control Panel Options
-
- Earth fault (2 wire only)
-
- Enclosures
-
- Sound attenuated Level 2 enclosure
- Rental pack - CAE rental option only
- Socket blanking plate - CAE rental option only
- CEE form sockets - CAE rental option only
- Sound attenuated Level 1 (galv)
-
- European Certifications
-
- Upgrade to STD set for CE
-
- Fuel System Accessories
-
- High fuel level alarm
- Low fuel level shutdown
- Skidbase for CALG enclosure sets
- Bunded fuel tank
- Low fuel level alarm
- Open set narrow tankbase
- Compact skidbase for open set
-
- Global Certifications
-
- Certification for CIS
-
- Mounting Options
-
- Silencer installation kit
- Electronic governor
- Residential siliencer
- External single point lift - enclosure
- Battery removal
- Industrial silencer
-
- Power Termination
-
- Circuit breakers, UL listed
-
- Special Packing/inspectons For Shipment
-
- PGS Test report @ 1.0 power factor
- PGS Test report @ 0.8 power factor
-
- General - Accessories / Miscellaneous
-
- Stone guards/rad trans flange
- Packing case - canopied set
- Packing case - compact set