Product Specs
Power Rating
- Power Range
- 775-1100 bhp (578-820 bkW)
Engine Specifications
- Speed Range
- 1200-1600 rpm
- Emissions
- IMO II, EU IW
- Aspiration
- TTA
- Bore
- 6.7 in
- Stroke
- 7.5 in
- Displacement
- 2107 in³
- Rotation from Flywheel End
- Counterclockwise or Clockwise
- Configuration
- Vee 8, 4-Stroke-Cycle Diesel
Dimensions & Weights
- Minimum Dry Weight
- 10935 lb
- Length
- 83.4 in
- Height
- 72 in
- Width
- 67 in
Standard Equipment
-
- Fuel System
-
- Fuel filter, RH, with service indicators.
- Fuel transfer pump.
- Electronically controlled init injectors
-
- Instrumentation
-
- Graphical Unit (Marine Power Display) for analog or digital display of
-
- Lube System
-
- Crankcase breather, Top mounted
- Oil filter, RH, with service indicators
- Oil filler and dipstick, RH
- Standard sump oil pan (500 Hour oil change interval)
- Oil pump, gear type
-
- Mounting System
-
- Rails, engine mounting, ledge type, 203 mm x 203 mm (8 in x 8 in)
-
- Power Takeoffs
-
- Accessory drive
- Front housing, two-sided
-
- Protection System
-
- A4 ECU Electronic Monitoring System provides customer programmable engine de-rate strategies to protect against adverse operating conditions
- AIII Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
- Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection:
-
- General
-
- Vibration damper and guard
- Lifting eyes
- Paint, Caterpillar Yellow engine with black rails
- NOTE: Engines for heat exchanger cooling do NOT include heat exchanger.
-
- Flywheel And Flywheel Housing
-
- Flywheel, SAE No. 0, 151 teeth.
- Flywheel housing, SAE No. 0.
-
- Air Inlet System
-
- Separate circuit aftercooler core, corrosion resistant coated (air side)
- Air cleaner, regular duty
- Dual turbochargers, 152 mm (6 in) OD straight connection
-
- Control System
-
- Dual Caterpillar A-III Electronic Engine Control, LH with Electronic Unit Injector Fuel System
- Rigid Wiring Harness (10 amp DC power required to drive Electronic Engine Control Module)
-
- Cooling System
-
- Oil cooler
- Thermostats and housing, Full open temperature 92 C (198 F)
- Jacket water pump, gear driven, centrifugal
- Auxiliary fresh water pump with SCAC engines
- Auxiliary sea water pump, Centrifugal, Non-self-priming
- Expansion tank
-
- Exhaust System
-
- Dry gas tight exhaust manifolds with heat shields.
- Dual turbochargers with watercooled bearings and heat shield.
- Exhaust outlet, vertical, 203 mm (8 in) round flanged.
Attachments
-
- Charging System
-
- Battery Charger, 10 amp
- Charging Alternators
-
- Cooling System
-
- Water Level Switch Gauge
- Coolant Level Sensors
- Connections
- Keel Cooling Conversions
- Heat Exchangers
- Auxiliary Water Pumps
- Sea Water Pump Removal
- Coolant Shunt Tanks
- Air Separator
- Marine Gear Cooling
-
- Instrumentation
-
- PL1000T Communication Module
- Customer Interface
- Thermocouples
- Remote Panel Display
- Remote Cylinder Temperature Display
- Pilot House Instrument Panels
- Marine Gear Sensors
- Engine Vision Display System
-
- Mounting System
-
- Engine Supports
- Vibration Isolators
-
- Power Take-offs
-
- Front Housing Accessories
- Flexible Coupling and Guards
- Upper Left Hand Front Location:
- Upper Right Hand Front Location:
- Upper Right Hand Rear Location:
- Lower Left Hand Front Location:
- Lower Left Hand Rear Location:
- Front Housing Accessory Drives
- Upper LH Accessory Drive
- Upper RH Accessory Drive
- Front Power Take Offs
- Crankshaft Pulleys
- Damper Guard Removals
-
- Air Inlet System
-
- Remote Air Inlet Adapters
-
- Control System
-
- Throttle Position Sensor
- Throttle Position Signal Conv.
- Throttle Position Sensor Removal
- Local Speed Throttle Control
- Throttle Synchronization
-
- Exhaust System
-
- Exhaust Outlet
- Flexible Fittings
- Elbows
- Flanges
- Flange and Exhaust Expanders
- Mufflers
-
- Lube System
-
- Oil Pan
- Oil Pan Accessories
- Sump Pumps
- Lubricating Oil
-
- Protection System
-
- Air Inlet Shutoffs
- Switches and Contactors
- Explosion Relief Valve
- Sensors
-
- Special Appearance
-
- Special Appearance Packages with Chrome Covers
- Chrome Plated Relief Valves
- Black Air Cleaners
- Yacht Class Finish
-
- Starting System
-
- Starting Motors or Barring Device
- Air Starting Motor Options:
- Starting Aids
- Battery Sets - 24 Volt - Dry
- Battery rack
-
- General
-
- Tool set
- Caterpillar datalink wire
-
- Packing
-
- Shrink Wrap Protection
- Storage Preservation with Glycol Solution/Vapor Corrosion Inhibitor
- Storage Preservation with Vapor Corrosion Inhibitor
- Export Packaging