Product Specs
Engine Specifications
- Maximum Rating
- 1600 ekW (2000 kVA)
- Minimum Rating
- 1600 ekW (2000 kVA)
- Emissions/Fuel Strategy
- Non-certified
- Aspiration
- Turbocharged-Aftercooled
- Manifold Type
- Dry
- Bore
- 6.69 in
- Stroke
- 7.48 in
- Displacement
- 4211 in³
- Engine Control and Protection
- ADEM A4
- Generator Set Control
- EMCP 4.4
- Generator
- SR4B
- Fuel System
- EUI
- Frequency - Speed
- 50 Hz (1500 rpm)
Capacity for Liquids
- Fuel
- CNG, LNG, field gas, natural gas with diesel
- Lube Oil System - Refill
- 107 gal (US)
- Cooling System - Engine
- 62 gal (US)
Dimensions
- Length
- 260.6 in
- Width
- 94.4 in
- Height
- 99.5 in
- Weight
- 41888 lb
Standard Equipment
-
- Air Inlet System
-
- Aftercooler core — corrosion resistant
- Air cleaner — regular duty with soot filter
- Service indicators
- Flame arrestors
-
- Control System
-
- ADEM A4 ECU
- ISM (integrated sensor module) for combustion feedback sensors
- Exhaust gas temperature sensors
-
- Cooling System
-
- Radiator cooled - land based
- Outlet controlled thermostat and housing
- Jacket water pump — gear-driven
- Dual outlet
- Aftercooler cooling pump (SCAC) — gear-driven centrifugal
-
- Diesel Fuel System
-
- Fuel filter
- Fuel transfer pump
- Flexible fuel lines
- Fuel priming pump
- Electronically controlled unit injectors
-
- Exhaust System
-
- Exhaust flexible fitting, adapter and flanges
- Dual turbochargers with water-cooled bearings
-
- Flywheel And Flywheel Housing
-
- SAE No. 00
- SAE standard rotation
-
- Gaseous Fuel System
-
- Low pressure regulator
- Electronically actuated fuel control valve
- Gaseous fuel heater
- Electronically controlled gas shut-off valve
- Gas induction nozzles
- CSA certified gas electronic components
-
- Instrumentation
-
- Analog gauges
- EMCP 4.4 control panel
-
- Lube System
-
- Crankcase breather
- Oil cooler
- Oil filter
- Shallow oil pan
- Oil pan drain valve
-
- Mounting System
-
- Oilfield base
- Heavy-duty land rig inner baseframe — three-point mountto oilfield base
-
- Power Take-offs
-
- Accessory drive
-
- Protection System
-
- ADEM A4 ECU monitoring system provides engine protectionstrategies to protect against adverse operating conditions.Selected parameters are customer programmable.
-
- Starting System
-
- Air starting motor
- Air silencer
-
- General
-
- Paint — Cat yellow
- Vibration damper and guard
- Lifting eyes
- Lift and cable tow provisions
Attachments
-
- Air Inlet System
-
- Heavy-duty air cleaners and precleaners
- Remote air inlet adapters
-
- Charging System
-
- Battery charger
- Charging alternator
-
- Control System
-
- Load sharing module
- Cat digital voltage regulator
- Governor conversion
- 2301A load sharing governor
-
- Cooling Systems
-
- High gloss black folded core radiators and conventional coreradiator
- Coolant regulator conversions
- Belt guard, radiator guard
- Blower fan – engine mounted
- Fan drive and fan pulley
- Radiator mounting
- Water level switch gauge
- Coolant level sensors
-
- Exhaust System
-
- Elbows
- Mufflers
- Flange and exhaust expanders
-
- Fuel System
-
- Primary fuel filter
- Fuel cooler
-
- Generator
-
- Oilfield spec twin-bearing, close-coupled
-
- Generator Attachments
-
- Air filter
- Low voltage extension box
- Potential transformer
- Manual voltage control
- Current droop transformers
- Cable access box
- Bearing temperature detectors
-
- Instrumentation
-
- Customer programmable annunciator
- Gauges and instrument panels
- Switches, relays, and contractors
-
- Lube System
-
- Fumes disposal
- Oil filter, oil pan accessories
- Sump pumps
-
- Mounting System
-
- Oilfield outer base with three-point mount
-
- Power Take-offs
-
- Front stub shaft
- Pulleys
-
- Protection System
-
- Explosion relieve valve, shutoffs
- Switches and contacts/relays
- Oil pressure monitors, sensors
-
- Starting System
-
- Air pressure regulator
- Starting aids
-
- General
-
- Tool set
- Cat data link wire