Product Specs
Generator Set Specifications
- Maximum Rating
- 1820 ekW (60Hz), 2425 kVA (50Hz)
- Minimum Rating
- 1650 ekW (60Hz), 2200 kVA (50Hz)
- Emissions/Fuel Strategy
- IMO Tier 2
- Frequency
- 50 / 60 Hz
- Speed
- 900 / 1000 rpm
- Duty Cycle
- Prime, Continuous
Engine Specifications
- Engine Model
- C280-6, I-6,4-Stroke Water-Cooled Diesel
- Bore
- 11 in
- Stroke
- 11.8 in
- Displacement
- 111 in³
- Compression Ratio
- 13:01
- Aspiration
- TA
- Fuel System
- Direct unit injection
- Governor Type
- Generator Set Monitoring System (GMS)
Generator Set Dimensions
- Length - Maximum
- 404 in
- Width - Maximum
- 99.62 in
- Height - Maximum
- 156.6 in
- Dry Weight - Genset (maximum)
- 74970 lb
Standard Equipment
-
- Air Inlet System
-
- Air inlet shutoff
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
- Breather, crankcase, top-mounted
-
- Cooling System
-
- Water temperature regulator
- Engine coolant water drains
- Jacket water thermostats
-
- Exhaust System
-
- Includes adapter, flexible exhaust fitting
- Dry, gas tight, exhaust manifold
- 457 mm (18 in) Cat bolt pattern
-
- Fuel System
-
- Simplex or duplex
-
- Generator System
-
- Custom generator per generator data sheet completed by dealer
-
- Governor System
-
- UG Actuator
-
- Lube System
-
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Centrifugal oil filters with single shutoff
- Service side engine mounted on cylinder block inspection covers
- Crankcase explosion relief valves
- Oil filler and dipstick
- Oil pressure regulating valve
-
- Mounting System
-
- Damper, torsional vibration
- Engine and generator mounting
-
- Starting / Charging System
-
- Vane type air starter
- Line group for single point custom connection
- Air silencer
- One motor, engine mounted at rear, on left side
-
- General:
-
- Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water
- Paint, Caterpillar yellow
Attachments
-
- Air Inlet System
-
- Air inlet adapter
- Soot filter
- Heavy duty air cleaner
- Boost control valve
- Air cleaner louver assembly
- Air cleaner
- Vertical support bracket
-
- Cooling System
-
- Auxiliary water pump
- Cooling system aids
- Heating aids
- Expansion tank
-
- Exhaust System
-
- Weld flange and related hardware
- Flexible exhaust fittings
-
- Fuel System
-
- Fuel system connections
- Fuel priming pump
- Duplex primary fuel strainer
-
- Generator System
-
- Class F insulation
- 3 Phase, six Leads, WYE
- Busbar connections
- Winding temperature detectors
- Anti-condensation space heaters
-
- Governor System
-
- 723 Plus
- Digital programmers
- Electronic/actuators
- Battery backup/power supply
- 2301 A load share
- EGB actuator
-
- Lube System
-
- Oil pan drain valve
- Lube ANSI adapter (Emergency connection)
-
- Mounting System
-
- Isolator
- Spring type vibration isolators
- Non-vertically restrained
- Vertically restrained
-
- Starting / Charging System
-
- Pressure reducing valve
- Compressed air flex hose
-
- General:
-
- Custom paint colors