Exterior View
Product Specs
Engine Specifications
- Minimum Rating
- 2625 kV·A
- Maximum Rating
- 2625 kV·A
- Emissions
- EPA Tier 2, IMO Tier II
- Engine Control
- ADEM A4
- Bore
- 6.7 in
- Weight
- 38581 lb
- Displacement
- 4764 in³
- Fuel System
- EUI
- Stroke
- 8.5 in
- Aspiration
- Dual Turbocharged-Aftercooled
Dimensions
- Length
- 264 in
- Height
- 99.8 in
- Width
- 78.2 in
Capacity for Liquids
- Lube Oil System - Refill
- 107 gal (US)
- Cooling System - Engine
- 62 gal (US)
Standard Equipment
-
- Air Inlet System
-
- Aftercooler core, corrosion resistant (air side)
- Air cleaner, regular duty with service indicators
- Dual turbochargers, rear mounted
-
- Control System
-
- Dual Caterpillar A4 electronic engine control with electronic unit injector fuel system and rigid wiring harness.
- 24 VDC (less than 10A) to be provided by customer at Power Distribution Panel to power engine electrical system.
-
- Cooling System
-
- Jacket water (JW) engine cooling and two-stage jacket water/separate circuit (SCAC) charge air cooling
- To ensure compliance in use, radiators or heat exchangers must be capable of rejecting sufficient heat to allow proper engine operation at worst site conditions.
- The radiator or heat exchanger must supply 48C (118 F)
- SCAC cooling water to the aftercooler inlet of at least 200 gal/min at ambient temperature of 30C and at site conditions (including altitude considerations)
-
- Exhaust System
-
- Dry gas-tight exhaust manifolds with heat shields, dual turbochargers with water-cooled bearings and heat shields.
- Exhaust outlet: 305 mm (12 in) round flanged outlet, vertical orientation
-
- Flywheels & Flywheel Housings
-
- Flywheel, SAE No. 00, 183 teeth Flywheel housing, SAE No. 00
- Flywheel housing, SAE No. 00
- SAE standard rotation
-
- Fuel System
-
- Duplex Fuel filter, LH service. Simplex fuel filter, RH service
- Fuel transfer pump
- Fuel priming pump, RH
- Electronically Controlled Unit Injectors
- Customer connection located at lower right front of engine
- SOLAS shielding
-
- Instrumentation
-
- Engine mounted instrument panel with four position switch, over speed shutdown notification light, emergency stop notification light, graphical display unit for analog or digital display of: oil and fuel pressure, oil and fuel filter differential, system DC voltage, exhaust and water temperature, air inlet restriction, service meter, engine speed, fuel consumption (total and instantaneous)
-
- Lube System
-
- Top mounted crankcase breather, RH oil filter, RH oil filler, gear type oil pump, deep sump oil pan, recommended use of Caterpillar Diesel Engine Oil 10W30 or 15W40
-
- Mounting System
-
- Mounting rails and isolation system based on customer request
-
- Electrical System
-
- MCS certified Class I / Divison 2
- Low Smoke Zero Halogen Wiring Harness
-
- Protection System
-
- A-III Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
- Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection for oil pressure and water temperature, over speed protection
-
- Hazardous Location
-
- Only electrical system is hazardous environment certified
- NEC 500 Class I Division 2 for gas groups C and D
- Temperature class is T3 for ambient temperatures from -10 C to 50 C
- Class I/ Division 2 CMPD
-
- Generator And Generator Attachments
-
- Class I / Division 2 designed to customer's specifications
- Insulation for harsh environment protection